Let me just start by saying that the options on your custom knife are virtually limitless. All it takes is for you to specify things like: handle material, grind height, hardware type ( ie brass, nickel silver), spacers or no, steel choice, steel thickness etc...
Of course any exotic materials will increase the price so all options should be discussed before ordering.
Base price on any knife includes the option of a single color micarta handle.
As always, if you have any questions at all, e-mail me any time and I'll get 'em answered.
I'll just show the more exotic pins here. Take a look through the galleries at some of the standard steel and brass pin set ups. There's several there.
These are some of the colored pins I can get:
From left to right: 1/4" yellow delrin, 1/4" white g10, 1/4" red delrin, 1/4" black micarta, 1/4" blue delrin, 1/4" jade g10 , 1/4" brown g10, 1/8" jade g10, 1/8" black carbon fiber and 1/8" brown g10.
Handle set-up with thin spacers (these happen to be white but many colors are available)
Handle with 1/8" spacers
Handle with sandwich spacers ( this one has a black tang spacer (closest to the tang of the knife), stainless steel sandwich spacers and black handle scales.)
Blade finish Heat treat scale left on
Blade finish, satin finished flats
Blade finish, entire blade hand sanded
Pommel plate (Standard on the Green River only but available on most others as an upgrade). This particular knife has a steel pommel plate with black sandwich spacers and o.d. green handle scales and tang spacers. Micarta and g10 pommel plates are available as an option.